Advances to ASHRAE Standard 55 to encourage more effective building practice

ASHRAE Standard 55 has been evolving in recent years to encourage more sustainable building designs and operational practices. A series of changes address issues for which past design practice has been deficient or overly constrained. Some of the changes were enabled by findings from field studies of comfort and energy-efficiency, and others by new developments in the design- and building-management professions.  The changes have been influencing practice and spurring follow-on research.The Standard now addresses effects of elevated air movement, solar gain on the occupant, and draft at the ankles, each with several impacts on energy-efficient design and operation. It also addresses the most important source of discomfort in modern buildings, the large inter- and intra-personal variability in thermal comfort requirements, by classifying the occupants’ personal control and adaptive options in a form that can be used in building rating systems. In order to facilitate design, new computer tools extend the use of the standard toward direct use in designers’ workflow. The standard also includes provisions for monitoring and evaluating buildings in operation. This paper summarizes these developments and their underlying research, and attempts to look ahead

Ceiling-fan-integrated air conditioning: Airflow and temperature characteristics of a sidewall-supply jet interacting with a ceiling fan

Ceiling-Fan-Integrated Air Conditioning (CFIAC) is a proposed system that can greatly increase buildings’ cooling efficiency. In it, terminal supply ducts and diffusers are replaced by vents/nozzles, jetting supply air toward ceiling fans that serve to mix and distribute it within the room. Because of the fans’ air movement, the system provides comfort at higher room temperatures than in conventional commercial/ institutional/retail HVAC. We have experimentally evaluated CFIAC in a test room. This paper covers the distributions of air-speed, temperature, and calculated comfort level throughout the room. Two subsequent papers report tests of human subject comfort and ventilation effectiveness in the same experimental conditions. The room’s supply air emerged from a high-sidewall vent directed toward a ceiling fan on the jet centerline; we also tested this same jet on a fan located off to the side of the jet. Primary variables are: ceiling fan flow volumes in downward and upward directions, supply air volume, and room-vs-supply temperature difference. Velocity, turbulence, and temperature distributions are presented for vertical and horizontal transects of the room. The occupied zone is then evaluated for velocity and temperature non-uniformity, and for comfort as predicted by the ASHRAE Standard 55 elevated air speed method. We show that temperatures are well-mixed and uniform across the room for all of the fan-on configurations, for fans both within or out of the supply jet centerline. The ceiling fan flow dominates the CFIAC airflow, and even though non-uniform is capable of providing comfortable conditions throughout the occupied area of the room

Thermosensory micromapping of warm and cold sensitivity across glabrous and hairy skin of male and female hands and feet

The ability of hands and feet to convey skin thermal sensations is an important contributor to our experience of the surrounding world. Surprisingly, the detailed topographical distribution of warm and cold thermosensitivity across hands and feet has not been mapped, although sensitivity maps exist for touch and pain. Using a recently developed quantitative sensory test, we mapped warm and cold thermosensitivity of 103 skin sites over glabrous and hairy skin of hands and feet in male (M; 30.2 ± 5.8 yr) and female (F; 27.7 ± 5.1 yr) adults matched for body surface area (M: 1.77 ± 0.2 m2; F: 1.64 ± 0.1 m2; P = 0.155). Findings indicated that warm and cold thermosensitivity varies by fivefold across glabrous and hairy skin of hands and feet and that hands (warm/cold sensitivity: 1.25/2.14 vote/°C) are twice as sensitive as the feet (warm/cold sensitivity: 0.51/0.99 vote/°C). Opposite to what is known for touch and pain sensitivity, we observed a characteristic distal-to-proximal increase in thermosensitivity over both hairy and glabrous skin (i.e., from fingers and toes to body of hands and feet), and found that hairy skin is more sensitive than glabrous. Finally, we show that body surface area-matched men and women presented small differences in thermosensitivity and that these differences are constrained to glabrous skin only. Our high-density thermosensory micromapping provides the most detailed thermosensitivity maps of hands and feet in young adults available to date. These maps offer a window into peripheral and central mechanisms of thermosensory integration in humans and will help guide future developments in smart skin and sensory neuroprostheses, in wearable, energy-efficient personal comfort systems, and in sport and protective clothing

Measuring 3D indoor air velocity via an inexpensive low-power ultrasonic anemometer

The ability to inexpensively monitor indoor air speed and direction on a continuous basis would transform the control of environmental quality and energy use in buildings. Air motion transports energy, ventilation air, and pollutants around building interiors and their occupants, and measured feedback about it could be used in numerous ways to improve building operation. However indoor air movement is rarely monitored because of the expense and fragility of sensors. This paper describes a unique anemometer developed by the authors, that measures 3-dimensional air velocity for indoor environmental applications, leveraging new microelectromechanical systems (MEMS) technology for ultrasonic range-finding. The anemometer uses a tetrahedral arrangement of four transceivers, the smallest number able to capture a 3-dimensional flow, that provides greater measurement redundancy than in existing anemometry. We describe the theory, hardware, and software of the anemometer, including algorithms that detect and eliminate shielding errors caused by the wakes from anemometer support struts. The anemometer has a resolution and starting threshold of 0.01 m/s, an absolute air speed error of 0.05 m/s at a given orientation with minimal filtering, 3.1° angle- and 0.11 m/s velocity errors over 360° azimuthal rotation, and 3.5° angle- and 0.07 m/s velocity errors over 135° vertical declination. It includes radio connection to internet and is able to operate standalone for multiple years on a standard battery. The anemometer also measures temperature and has a compass and tilt sensor so that flow direction is globally referenced regardless of anemometer orientation. The retail cost of parts is $100 USD, and all parts snap together for ease of assembly

Transient human thermophysiological and comfort responses indoors after simulated summer commutes

The current study investigates the transient human physiological and comfort responses during sedentary activity following a period of elevated activity in a hot condition. Such metabolic and thermal down-steps are common in buildings as occupants arrive after commuting in summer. It creates a serious problem for thermostatic control, since arriving occupants find their transition uncomfortably warm at temperatures that resident occupants find comfortable. Fifty-nine participants (29 men, 30 women) dressed in 0.6 clo were tested while sedentary for 60 min in 26 °C, after having been exposed to 30 °C for 15min, during which they performed activities metabolically simulating commuting: sitting (SE- 1.2 met), or doing three levels of stair-step exercises: low (LEx- 2.2 met), medium (MEx - 3.0 met), and high (HEx - 4.4 met). Subjective comfort and physiological responses (metabolic rate, skin temperature, skin blood flow rate, heart rate, core temperature, and skin wettedness) were collected. Results show that sedentary conditions at 26°C became comfortable and acceptable within 2 min, but thermal sensation required much longer to change from ‘warm’ or ‘hot’ to ‘neutral’: 0, 8, 17, 30 min after SE, LEx, MEx, HEx respectively. Skin wettedness and core temperature did not recover within the60 min. The delays are mainly due to body heat stored during the exercise. A room temperature of 26°C may not provide sufficient cooling after summer commuting. Localized convective cooling of transitional spaces and work areas by ceiling or desk fans represent a way to enhance comfort recovery

Integrating Smart Ceiling Fans and Communicating Thermostats to Provide Energy-Efficient Comfort

The project goal was to identify and test the integration of smart ceiling fans and communicating thermostats. These highly efficient ceiling fans use as much power as an LED light bulb and have onboard temperature and occupancy sensors for automatic operationbased on space conditions. The Center for the Environment (CBE) at UC Berkeley led the research team including TRC, Association for Energy Affordability (AEA), and Big Ass Fans (BAF). The research team conducted laboratory tests, installed99 ceiling fans and 12 thermostats in four affordable multifamily housing sites in California’s Central Valley, interviewed stakeholders to develop a case study, developed an online design tool and design guide, outlined codes and standards outreach, and published several papers.The project team raised indoor cooling temperature setpoints and used ceiling fans as the first stage of cooling; this sequencing of ceiling fans and air conditioningreducesenergy consumption, especially during peak periods, while providing thermal comfort.The field demonstration resulted in 39% measured compressor energy savings during the April–October cooling seasoncompared to baseline conditions, normalized for floor area. Weather-normalized energy use varied from a 36% increase to 71% savings, withmedian savings of 15%.This variability reflects the diversity in buildings, mechanical systems, prior operation settings, space types, andoccupants’ schedules,preferences, and motivations. All commercial spaces with regular occupancy schedules (and twoof the irregularly-occupied commercial spaces and one of the homes) showed energy savings on an absolute basis before normalizing for warmer intervention temperatures,and 10 of 13 sites showed energy savings on a weather-normalized basis. The ceiling fans provided cooling for one site for months during hot weather when the coolingequipment failed.Occupants reported high satisfaction with the ceiling fans and improved thermal comfort. This technology can apply to new and retrofit residential and commercial buildings